TL;DR
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
A TikTok creator known as One Handy Momma demonstrated using a plywood board supported by an open bathroom vanity drawer as temporary extra counter space. The Hunker report describes the materials and setup, but provides no testing, measurements, or evidence that the idea works with every drawer or vanity.
A TikTok creator called One Handy Momma has demonstrated a removable way to add bathroom counter space: rest a cut piece of plywood across an open vanity drawer and use it as a temporary surface. Hunker reported on the tip, which could give people in small or shared bathrooms a place for grooming items without permanently changing the vanity.
The setup described in the report uses a board cut to fit across the side walls of an upper vanity drawer. Two L-brackets are attached underneath, near the board’s left and right edges, so they hang over the drawer’s sides and help keep the board in position. The drawer supports the extension while it is in use; the board can then be removed so the drawer can close.
For materials, the report lists plywood, a measuring tape, a pencil or pen, a saw, two L-brackets and screws, and a drill or screwdriver. The creator’s video is presented as a quick DIY idea, but the report does not provide a specific board thickness, load limit, or measurements that would suit every vanity. Users would need to measure their own drawer and account for its construction before cutting or attaching hardware.
The board can be left unfinished or given a decorative treatment, such as stain, paint or decoupage. Hunker suggests considering a water-resistant finish because bathroom surfaces may encounter moisture. The extension is intended as a temporary place for items such as a cosmetics bag or hair tools, not as a permanently installed counter.
A Removable Surface for Tight Vanities
The idea addresses a familiar space problem without requiring a new vanity or a permanent countertop alteration. For someone sharing a bathroom, an extra temporary surface may make room for items used during a morning routine while leaving the existing counter in place. Because the board can be stored when not needed, it may also suit bathrooms where a fixed shelf would add clutter.
Its usefulness depends on the particular drawer and how the board is made. A surface balanced over an open drawer is not equivalent to a professionally installed counter, and the source does not establish how much weight it can safely bear. Treating it as a light-duty, temporary work surface is a practical distinction, especially around breakable toiletries and hot or powered grooming tools.
Products Worth Considering
Roborock Qrevo CurvX Robot Vacuum and Mop
Dyson Cyclone V10 Origin Cordless Vacuum
LG C2 Series 65-Inch OLED evo 4K Smart TV (OLED65C2PUA, 2022)
As an affiliate, we earn on qualifying purchases.
How the Drawer Extension Works
The source article frames the tip as a response to crowded bathroom counters, where everyday necessities and decorative objects compete for limited room. Rather than clearing the counter or adding a permanent fixture, the DIY uses the existing vanity drawer as its support. The board’s brackets are meant to sit over the drawer’s side walls and limit movement while the drawer is open.
Hunker also describes an optional variation: placing a board over the sink basin for more surface area. That suggestion is not accompanied by details about securing the board or making it suitable for every sink. Any such use would need a stable fit that cannot slide or tip, and the surface should be completely dry before electrical devices are placed on it, as the report cautions.
““This is my hack to give me extra countertop space when I need it!””
— One Handy Momma, in the TikTok video described by Hunker
Fit and Load Limits Are Unspecified
The source does not identify the drawer dimensions, plywood thickness, bracket size, or a safe maximum load. It also does not report whether the setup was tested across different vanity designs. Drawer construction and condition vary, so it is unclear whether every drawer side wall can support a board and the items placed on it without shifting or damage.
The report does not specify a finish product or drying time, nor does it explain how to secure a board over a sink. The TikTok caption and Hunker article establish that the idea was presented, but they do not provide independent testing or evidence of long-term durability. Readers should not assume the board is safe for heavy items or powered tools simply because it fits.
Measure Before Cutting the Board
Anyone considering the project would first need to measure the intended drawer’s width and depth, check that its sides are sturdy, and cut the board to rest securely across them. The brackets should align with the drawer walls, and the assembled board should be checked for movement before anything is placed on it. A water-resistant finish may help limit moisture exposure, but it should be fully dry before use.
Keep the board away from water when using electrical grooming devices, and do not leave a hot tool unattended on a surface that may be unsuitable for heat. The source offers no formal build standard or tested load rating, so the next step for readers is to judge the fit and stability of their own vanity rather than rely on a universal specification.
Key Questions
What is the bathroom storage hack?
It uses a plywood board over an open vanity drawer as a temporary surface. Two L-brackets underneath are positioned to hang over the drawer’s side walls.
What materials does the project require?
Hunker lists plywood, a measuring tape, a pencil or pen, a saw, two L-brackets and screws, and a drill or screwdriver. The board must be measured and cut to fit the drawer.
Can the drawer close with the board attached?
The report says it may be possible to slide the drawer closed with the board still in place. Otherwise, remove the board and store it under the vanity or in a closet.
Is the extension suitable for electrical grooming tools?
The report mentions hair tools as possible items to set on the board, but gives no load or heat rating. Keep powered devices away from water, use them only on a dry, stable surface, and do not leave hot tools unattended.
Will the idea work with every bathroom vanity?
That is not established. Drawer dimensions and construction differ, and the source gives no tested fit or weight limit. Check the drawer’s condition and the board’s stability before use.
Source: rss
