Cleaning your Bissell Little Green is essential for maintaining its performance and extending its lifespan. Regular cleaning prevents clogs and buildup, ensuring your device works efficiently every time.
This guide provides practical, step-by-step instructions to help you clean your Little Green safely, effectively, and without damaging the machine.
Gather Necessary Supplies
- Fresh water
- Cleaning solution (appropriate for your machine)
- Soft cloth or sponge
- Small brush (optional for stubborn dirt)
- Towel or rag for drying
JORAIR Brush Replacement Compatible with Bissell CrossWave, 3 Multi-Surface Brush Roll 1868 + 3 Vacuum Filter 1866 Vacuum Filter, Compare to Part 1608683, 160-8683, 1608684
【Compatibility】The filter and brush replacement compatible with Bissell CrossWave 1785G,1785B,1785F,2328,2305,2305K,1785,17853,17854,17855,17856,1785Q,1785A,17852,17858,17859,1785P,1785R,1785T,1785V,1785W,2303,2306A,2306,23062,23068,2551,3888A (Please note：this kit is only compatible with Bissell...
As an affiliate, we earn on qualifying purchases.
Empty and Rinse the Water Tank
- Unplug the Little Green from the power source.
- Remove the water and solution tank from the unit.
- Empty the tank completely into the sink.
- Rinse the tank with clean water to remove any residual dirt or cleaning solution.
Clean the Brush and Nozzle
- Detach the brush roll (if removable) and rinse with warm water.
- Use a small brush or cloth to scrub away hair, lint, or debris.
- Clean the nozzle and surrounding areas to prevent clogs.
Wipe Down the Exterior and Attachments
Use a damp cloth with mild soap to wipe the exterior of the machine. Clean any attachments thoroughly and dry with a towel.
Reassemble and Test
- Reattach the brush roll and water tank securely.
- Fill the tank with clean water and a small amount of cleaning solution.
- Plug in the machine, turn it on, and run it for a short cycle to ensure everything works properly.
Tips and Warnings
- Always unplug the device before cleaning to avoid electrical shock.
- Use only manufacturer-approved cleaning solutions to prevent damage.
- Regularly clean the filter (if applicable) for optimal performance.
- Avoid using harsh chemicals or abrasive tools that could damage plastic parts.
Products That Help
JORAIR Brush Replacement Compatible
- ✔ Compatibility: Specific CrossWave models
- ✔ Package: 3 brush rolls, 3 filters, 1 brush
- ✔ Material: Synthetic fibers
JORAIR Brush Replacement Compatible
This replacement kit with multi-surface brush rolls and filters ensures your Bissell CrossWave (and similar models) perform at their best. It’s a cost-effective way to maintain your machine’s cleaning power.
Pros:
Cons:
Best for: Replacing worn brushes and filters for optimal cleaning
Not ideal for: For non-CrossWave Bissell models or handheld units
Bottom line: A comprehensive replacement set to keep your CrossWave performing flawlessly.
Frequently Asked Questions
Can I use regular soap to clean the water tank?
It’s best to use plain water for rinsing. For thorough cleaning, use a mild soap or manufacturer-approved cleaning solution, then rinse thoroughly.
How often should I clean the brush roll?
Clean the brush roll after every few uses or whenever you notice hair, lint, or debris buildup to maintain optimal performance.
Is it safe to immerse the water tank in water?
Only rinse the water tank with water; do not immerse the entire tank in water or submerge electrical components to avoid damage.
What should I do if the machine is not picking up water?
Check for clogs, clean the filters and nozzles, and ensure the brush roll is free of debris. Regular maintenance prevents this issue.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
