TL;DR
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Formlabs has launched the Studio 1, an MSLA resin 3D printer priced from $699—well below the company’s Form 4, which starts at $2,625. The company promotes ease of use, print reliability and certified resin safety, but those performance claims have not been independently verified in the supplied report; the printer also supports only Formlabs software and a smaller selection of the company’s resins.
Formlabs has launched the Studio 1, an MSLA resin 3D printer starting at $699, placing it well below the company’s Form 4, which starts at $2,625. The printer is pitched as a more accessible entry into Formlabs’ resin-printing range, but it is limited to the company’s own software and supports fewer Formlabs resin types than the Form 4.
The graphite Studio 1 is listed at $699; three limited-edition colors—aqua, violet and teal—cost $749 and include a flex build platform, which the source says allows quicker part removal. Formlabs’ combined washing and curing station, the Form Studio Wash Cure, is priced at $199. ToolGuyd calculates that the graphite printer and combo station cost $948 together; adding a VOC extractor and a first bottle of Alpha resin brings its example setup to $1,106. The corresponding total for a colored model is $1,156.
According to the specifications cited by ToolGuyd, the Studio 1 has a 20 × 12.5 × 23.5 cm build volume, a 35-micrometre pixel size and a maximum print rate higher than the Form 4’s. The comparison also lists lower light output—6 mW/cm² versus 16 mW/cm²—and lower accuracy for the Studio 1. The report says the new model lacks a resin mixer and supports nine Formlabs resin types, compared with 22 for the Form 4.
The printer comes with Formlabs’ PreForm and Form Mobile software. ToolGuyd notes that it is not compatible with third-party slicers or print-preparation software. The company describes the resin as low-odor and says its safety claims apply to specific resins and use with a VOC extractor; the report lists that extractor at $179. It also lists service plans at $99 for one year and $199 for three years.
A Lower Entry Price, With Limits
The Studio 1’s price gives buyers a lower-cost route into Formlabs’ resin-printing ecosystem than the company’s higher-priced machines. That matters for hobbyists, small businesses and workshops comparing desktop resin printers, particularly those who want a coordinated printer and post-processing setup rather than choosing separate components.
The advertised starting price is not the whole cost of operation. A buyer may also need resin, washing and curing equipment, and ventilation equipment depending on the materials and intended setup. ToolGuyd’s example totals—$1,106 for a graphite printer with the combo station, VOC extractor and first Alpha resin—show how additions change the budget. The restricted software and resin compatibility also mean that the lower price comes with less flexibility than the Form 4, according to the report’s comparison.
Formlabs Studio 1 resin 3D printer
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
How It Compares With Form 4
Formlabs’ Studio 1 is an MSLA resin printer, a category in which a light source and a masked display expose resin layer by layer. The source frames the machine as a lower-priced alternative within Formlabs’ own lineup, not as a direct match in every specification to its higher-end printers.
ToolGuyd compares it with the Form 4, listed as starting at $2,625. The Studio 1’s larger build volume is taller by about one inch, and its stated pixel size is finer, while the cited comparison gives it lower accuracy and less light output. Formlabs’ figures, as reported by ToolGuyd, also show fewer supported resin types. The source does not provide independent testing of print quality, speed or reliability.
“professional resin printing for anyone”
— Formlabs, as quoted in ToolGuyd’s report
As an affiliate, we earn on qualifying purchases.
Claims Await Independent Testing
The supplied report does not provide independent test results for the Studio 1’s print success rate, print times, accuracy or ease of use. Formlabs’ statements about 99% print success, printing in less than two hours and learning the system in 10 minutes should be treated as company claims; the source gives no test conditions or measurement basis for them.
The report also does not establish the total cost for every buyer, since resin choice, ventilation needs and optional equipment vary. Formlabs’ safety description is tied to specific resins and use with a VOC extractor, according to the source. It is not clear from the supplied material how the printer performs with different kinds of parts or how its restrictions affect users who rely on third-party software or materials.
As an affiliate, we earn on qualifying purchases.
Pricing and Setup Details
Buyers considering the Studio 1 will need to compare the $699 graphite price with the $749 colored versions, then account for resin and any processing or ventilation equipment needed for their setup. The source lists the Form Studio Wash Cure at $199 and the VOC extractor at $179, but does not provide further information about shipping, availability by market or delivery timing.
The practical test of the launch will be whether independent users can reproduce Formlabs’ stated results and whether the printer’s narrower software and resin support suits their work. No independent test findings or additional company performance data are included in the supplied report.
VOC extractor for resin 3D printing
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Key Questions
How much does the Formlabs Studio 1 cost?
The graphite model starts at $699. The aqua, violet and teal versions are listed at $749 and include a flex build platform. The separate Form Studio Wash Cure costs $199.
What does a fuller starter setup cost?
ToolGuyd estimates $1,106 for the graphite printer, wash-and-cure unit, VOC extractor and first bottle of Alpha resin. Its estimate for a colored printer with those items is $1,156; actual requirements may vary.
Can the Studio 1 use third-party slicer software?
No. ToolGuyd reports that the printer is not compatible with third-party slicers or print-preparation software. It includes Formlabs’ PreForm and Form Mobile software.
How does it differ from the Form 4?
The Studio 1 starts at a lower price and has a slightly larger build volume and finer stated pixel size, according to the comparison in ToolGuyd’s report. The report also lists lower accuracy, lower light output, no resin mixer and support for nine resin types, compared with 22 for the Form 4.
Are the printer’s speed and reliability claims independently confirmed?
Not in the supplied report. Claims including 99% print success and that most parts take less than two hours are attributed to Formlabs; the source provides no independent testing or detailed methodology.
Source: rss
Halloween Picks
halloween
As an affiliate, we earn on qualifying purchases.
