If your Bissell carpet cleaner isn’t spraying properly, it can be frustrating and hinder your cleaning efforts. Fortunately, many issues are simple to diagnose and fix at home with some basic steps. This guide walks you through the most common causes and provides clear, safe instructions to get your machine spraying again.
Before troubleshooting, ensure your machine is unplugged for safety. Follow each step carefully and check your machine after each fix to see if the problem is resolved.
Key Takeaways
| Clogged Nozzle | Blocked spray nozzles prevent proper water flow. |
| Empty Water Tank | Insufficient water causes no spray. |
| Solution Blockage | Stored solution may be dried or clogged. |
| Pump Malfunction | Pump failure stops water from spraying. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
- Powerful Suction: 40% more suction with TurboStrength motor
- Quiet Operation: 50% noise reduction for quieter cleaning
- Max Clean Mode: Removes dirt, stains, and allergens
As an affiliate, we earn on qualifying purchases.
Check the Water Tank
- Ensure the water tank is full and properly seated on the machine.
- Remove the tank carefully and inspect for cracks or leaks.
- Refill with clean water and reattach securely.
Inspect and Clear the Nozzle
- Locate the spray nozzle at the front of the cleaner.
- Use a small tool or pin to gently clear any dried solution or debris from the nozzle opening.
- Rinse the nozzle with warm water if needed, then dry thoroughly before reassembling.
Check the Solution System
If using a solution, ensure the solution tank is filled and the solution switch is turned on. Clear any blockages in the solution line if accessible, or consider replacing the solution filter if clogged.
Test the Pump and Hoses
- Unplug the machine and check hoses for kinks or obstructions.
- Gently disconnect hoses to look for buildup or dried solution blocking flow.
- Reattach hoses securely and test the spray function.
Perform a Reset or Deep Clean
If the spray still isn’t working, perform a reset by unplugging the machine for 10-15 minutes. Then, reassemble and run a cleaning cycle to flush out any clogs.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Color: Grey/Red
- ✔ Tank Capacity: 1.25 gallons
- ✔ Warranty: 2 years
JORAIR Brush Replacement Compatible
- ✔ Warranty: None specified
- ✔ Material: Durable plastic
- ✔ Use Time: Up to 6 months per brush roll
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner combines powerful suction with innovative features like Heatwave Technology to maintain water temperature, ensuring a deep clean. Its TurboStrength Motor delivers 40% more suction power, making it a reliable choice for tackling stubborn dirt and stains.
Pros:
- Powerful suction with 40% more suction power
- Quiet operation with noise reduction
- Effective pet stain removal
- Fast drying with Express Clean Mode
Cons:
- Heavier than some models
- Requires regular maintenance
- Can be expensive
Best for: Pet owners and those needing deep, professional-grade carpet cleaning
Not ideal for: Light or quick cleans, or for small spaces
Bottom line: A powerful, pet-friendly carpet cleaner with advanced features for professional results.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement Kit offers a compatible solution for Bissell CrossWave models, providing multi-surface brush rolls and filters that help restore cleaning performance. Easy to install and cost-effective, it extends your machine’s lifespan.
Pros:
- Compatible with multiple CrossWave models
- Includes 3 brush rolls and filters
- Easy to install
- Affordable price
Cons:
- Limited to CrossWave models
- Not suitable for non-compatible Bissell vacuums
- Requires periodic replacement
Best for: Maintaining and restoring Bissell CrossWave cleaning efficiency
Not ideal for: For machines outside the listed models or older units
Bottom line: A cost-effective way to keep your CrossWave performing at its best.
Frequently Asked Questions
Why is my Bissell carpet cleaner not spraying water?
Common causes include a clogged nozzle, empty water tank, solution blockage, or pump malfunction. Follow the troubleshooting steps to identify and fix the issue.
How do I clear a clogged spray nozzle?
Use a pin or small tool to gently remove any dried solution or debris from the nozzle opening. Rinse with warm water and dry before reassembling.
My water tank is full, but the cleaner still doesn’t spray. What should I do?
Check the solution system and hoses for blockages, ensure the pump is functioning properly, and perform a reset if necessary.
Is it safe to use cleaning solutions other than Bissell’s recommended formulas?
It’s best to use solutions specifically formulated for your Bissell model to avoid damage. Refer to your user manual for compatible products.
Getting Your Bissell Spray Flow Restored
By following these simple troubleshooting steps, you can often fix a Bissell carpet cleaner that isn’t spraying. Regular maintenance, such as cleaning the nozzle and checking the water and solution tanks, will keep your machine performing optimally. If problems persist, consider replacing worn parts or consulting professional service to maintain excellent cleaning results.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
